New Title

Are you concerned that your radon mitigation system isn’t working or may need servicing? Read the following checklist on troubleshooting your radon system.

• Troubleshooting 1: my radon system fan isn't running, but my u-tube is leveled out at zero on both sides.

Step 1: check your u-tube

The u-tube manometer measures fan operation and has a small tube that runs off of the top (either side) and into the pipe itself. This is how it takes its readings. If the tube falls out for any reason, the manometer will read as if the fan were not running. Reinsert or replace tubing into the hole in the pvc pipe or u-tube if missing.

Step 2: check your breaker

The circuit breaker that the radon fan is running should be properly labeled. If the fan is not working, check the breaker to see if the breaker has tripped. Reset the breaker. At times, you may need to flip the breaker off and back on if not tripped. Also, a gfci outlet may have tripped and needs to be reset.

Step 3: check other power source location

If the fan is located in the attic, it’s powered by an outlet within 6ft of the fan. Make sure that it did not accidentally get unplugged. If the fan is located outside, there is an electrical box with an on/off switch on it located near the fan or plugged into an outlet. Sometimes these switches can be accidentally flipped off or unplugged. Make sure that your switch is in the “On” position or plugged in.

• Troubleshooting 2: I need to get into my sump pump?

By all means open your sump pit to make repairs to the pump. Most sump covers are only caulked in place around the outside and are split for easy removal. Re-caulk sump cover after repairs have been made with silicone caulk.

• Troubleshooting 3: does the plastic sheeting (vapor barrier) in my crawl space balloon up?

It is common in the winter for the plastic in the crawl space to get air pockets; it is not a bubble of radon. Placing weight on the plastic will help prevent this.

• Troubleshooting 4: is there a gurgling sound coming from my radon system pipe?

Pipe slope is off, or pipes in smaller sizes tend to gurgle at the elbows (contact our office for repair).

Repair: adjust the pitch of the pipe, increase the size of the pipe, or add another suction point to allow for drainage.

• Troubleshooting 5: my radon levels won't go below 4 pci/l with an active system? 

Contact our office; we need to re-evaluate your system.

Since 2008, Radon Be Gone has installed over 25,000 radon mitigation systems with a commitment to quality and customer satisfaction. Our team brings 18 years of experience to every troubleshooting call. We stand behind our work with comprehensive warranties and proven results:

• NRPP and AARST certified technicians
• Lifetime transferable warranty on systems
• Licensed and insured for your protection
• 5-star Google reviews from satisfied customers
• Locally owned and operated throughout Utah
• Preferred vendor for multiple real estate agencies
• Multi-family measurement and mitigation certified
• Free quotes on all repair services

Our specialized training and custom approach keep your radon system operating at peak efficiency, typically reducing radon levels within 24 hours of service completion.

When your radon mitigation system shows signs of trouble, Radon Be Gone provides prompt and professional troubleshooting services throughout Utah and surrounding areas. Our certified technicians diagnose issues accurately and implement effective solutions backed by our lifetime transferable warranty. From routine maintenance to emergency repairs and system upgrades, we deliver guaranteed results. Contact us today for your free quote and restore your peace of mind with a properly functioning radon mitigation system.